Ag Machinery – Safety and Technology Project

Menu: Click across the green arrows to view active and completed project stages. Consultation takes place at every stage of the project.

Case for change

The “safe operation of agricultural machinery and new technology” was identified as a priority skill area in the 2017 Agriculture, Horticulture, Conservation and Land Management IRC Skills Forecast and Proposed Schedule of Work (see page 50). Skills Impact, the Agriculture and Production Horticulture Industry Reference Committee (IRC) and the Amenity Horticulture, Landscaping, Conservation & Land Management IRC will take this project through a process that adheres to the 2012 Standards for Training Package Development.

Download the IRC Skills Forecast (see page 50)

Project Plan

Project Scope

This project will review units of competency, skill sets and qualifications relating to the use of new technology and safety measures across a range of mobile farm machinery operations.

Industry has identified important units of competency, skill sets and qualifications that need to be updated or created to incorporate the use of new technology and safety measures in all farm mobile machinery operations within the agriculture sector, including riding quad bikes, tractors, seeders, two-wheel motorbikes and other specialised equipment. Knowledge about the following areas has been noted as particular importance:

  • The associated risks and safety measures relating to farm mobile machinery operations
  • The serious risks of quad bikes, and particularly the risk of rollover when driving in steep and rocky terrain.
  • The use of personal protective equipment and engineering controls that ‘design out’ the hazard.
  • The use of active riding skills on motorbikes.
  • Skills gap for operating commercial lawnmowers

Register your interest in the project

Subscribe to the Skills Impact newsletter to keep informed about project updates. Make sure to select ‘Agriculture, Horticulture, Conservation & Land Management’ as your industry of interest on the subscription form.

 

Relevant occupations

Farm managers, farm workers, machinery operators, local government/council workers, parks and gardens workers and sports turf industry.

 

Key deliverables
  • Review and improvement of 35 units of competency across Machinery and Operation (MOM) and 1 qualification (Certificate III in Rural Machinery Operations)
  • Development of up to 5 new units and/or skill sets as identified during review

 

Timeline

August 2017
Initial scoping

September, October 2017
Review process commencement

November, December 2017
Industry consultation of draft materials

February 2018
Industry validation of final drafts

March 2018
Finalisation of Training Package components

April, May 2018
Independent Quality Assurance, and Edit and Equity review of Training Package components

June 2018
IRC consideration for sign-off and submission for endorsement

 

Project Team
Sam PapasideroIndustry Facilitation Manager, Skills Impact [email protected]
Ruth GeldardIndustry Skills Standards Specialist, Skills Impact [email protected]
Peter MillerSkills Development Specialist, P.E.M Consulting

 

Subject Matter Experts

Subject Matter Experts will be drawn on throughout this project to help review and draft the revised units, skill sets and qualifications.

If you are interested in applying to be a subject matter expert and are able to volunteer your time to this project, please email details of your expertise to [email protected]

Opportunities for stakeholder input:

Below is a list of the current and existing units of competency that will be reviewed as part of this project. To view a specific unit, please click on the unit title.

We are seeking your feedback on how these units could be reviewed to address skills related to the following industry concerns:

  • Safety concerns regarding the operation of quad bikes, side-by-side and related vehicles
  • Safety concerns and technological advances for other types of agricultural machinery (tractors, crop planting, harvesters, loaders, graders and other specialised machinery and equipment)
  • Technological and design solutions
  • Operator awareness and training solutions

Your feedback will help us in drafting the revised units.

To provide feedback, please email Ruth Geldard [email protected]

 

AHCMOM101 Assist with routine maintenance of machinery and equipment

AHCMOM202 Operate tractors

AHCMOM203 Operate basic machinery and equipment

AHCMOM204 Undertake operational maintenance of machinery

AHCMOM205 Operate vehicles

AHCMOM206 Conduct grader operations

AHCMOM207 Conduct front-end loader operations

AHCMOM208 Conduct excavator operations

AHCMOM209 Conduct dozer operations

AHCMOM210 Conduct scraper operations

AHCMOM213 Operate and maintain chainsaws

AHCMOM214 Operate cane haulage vehicle

AHCMOM301 Coordinate machinery and equipment maintenance and repair

AHCMOM302 Perform machinery maintenance

AHCMOM304 Operate machinery and equipment

AHCMOM305 Operate specialised machinery and equipment

AHCMOM306 Ground spread fertiliser and soil ameliorant

AHCMOM307 Operate a cane harvester

AHCMOM308 Operate broadacre and row crop harvest machinery and equipment

AHCMOM309 Operate broadacre sowing machinery and equipment

AHCMOM310 Operate land-forming machinery and equipment

AHCMOM311 Operate precision control technology

AHCMOM312 Operate row crop planting and seeding machinery and equipment

AHCMOM313 Operate mobile irrigation machinery and equipment

AHCMOM314 Transport machinery

AHCMOM315 Operate chemical application machinery and equipment

AHCMOM316 Refuel machinery or vehicle

AHCMOM401 Conduct major repair and overhaul of machinery and equipment

AHCMOM402 Supervise maintenance of property, machinery and equipment

AHCMOM501 Manage machinery and equipment

AHCMOM502 Implement a machinery management system

AHCMOM601 Analyse machinery options

Development

Consultation with Subject Matter Experts, who have broad experience and knowledge of safety and technological issues related to the operation of mobile farm machinery, has occurred throughout September and October. This consultation will inform the development of revised draft units of competency and qualifications related to farm machinery operations. The draft materials will be completed by the end of October and will be available for download and comment from this webpage by early November.

Face-to-face consultation workshops to seek feedback on the draft units and qualifications are also planned for the following locations and dates, with a webinar planned for those unable to attend in person. Please feel free to register for a workshop near you or a webinar by clicking the corresponding link.

Face-to-Face Consultation Workshops

9 Nov 17, 8:00 – 10:00 – Adelaide, SA – register here

14 Nov 17, 8:00 – 10:00  – Perth, WA – register here

16 Nov 17, 14:30 – 15:30  – Darwin, NT – register here

22 Nov 17, 11:00 – 13:00 – Brisbane, QLD – register here

23 Nov 17, 11:00 – 13:00  – Orange, NSW – register here

29 Nov 17, 10:00 – 12.00 – Launceston, TAS – register here

30 Nov 17, 10.00 – 12.00 – Bendigo, VIC – register here

Consultation Webinar

27 Nov 17, 15:45 – 16:30 AEST – Webinar – register here

 

Register your interest in the project

Subscribe to the Skills Impact newsletter to keep informed about project updates. Make sure to select ‘Agriculture, Horticulture, Conservation & Land Management’ as your industry of interest on the subscription form.

Drafts Available

Thank you to all those who provided feedback on the draft Certificate III in Rural Machinery Operations and units of competency. The drafts were made available on the Skills Impact website from 9 November – 10 December 2017. A series of face-to-face consultation workshops and a webinar also took place throughout November.

The qualification and units were reviewed and updated to incorporate the use of new technology and safety measures in all farm mobile machinery operations within the agriculture sector. Feedback was sought on whether the draft Certificate III in Rural Machinery Operations and units reflect the current skills standards and practices of industry, and whether job functions are accurately described. The feedback will inform the work on the final drafts, which will be available for industry validation in February 2018.

The draft qualification and units that were available for industry review and feedback are listed below.

Qualification

Please note that the following updates have been made to this draft qualifications.

  • The packaging rules have been changed from 6 core units and 10 elective units to 7 core units and 9 elective units, to include AHCBIO305 Apply biosecurity measures to the Core Units.
  • Two imported units RIIMPO312D conduct scraper operations and TLILIC2001 Licence to operate a forklift truck have been added to the elective list as a result of industry feedback.
  • Additional machinery and maintenance units have been added to the elective list to broaden the scope of the qualification and include operation of specialist types of machinery.
AHC32616 Certificate III in Rural Machinery OperationsDownload draft qualification

 

Units of Competency

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify:

  • Active riding techniques
  • Pre-operational checks
  • Personal protective equipment
  • Biosecurity implications
  • Load, unload and securing methods
AHCMOM211 Operate side by side utility vehiclesDownload draft unit
AHCMOM212 Operate quad bikesDownload draft unit
AHCMOM201 Operate two wheel motorbikesDownload draft unit

This new unit has been developed in response to industry feedback regarding a training requirement for the operation of commercial lawnmowers.

AHCXXXXXX Operate commercial lawnmowersDownload draft unit

Please note that the performance criteria has been updated and a new range of conditions section has been added to clarify:

  • Pre-operational checks
  • Machinery and equipment
  • Personal protective equipment
AHCMOM101 Assist with routine maintenance of machinery and equipmentDownload draft unit

Click here to download a zipped folder of all units in this group

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify:

  • Pre-operational checks
  • Attachments
  • Biosecurity Implications
  • Machinery and equipment
AHCMOM202 Operate tractorsDownload draft unit
AHCMOM203 Operate basic machinery and equipmentDownload draft unit
AHCMOM204 Undertake operational maintenance of machineryDownload draft unit
AHCMOM205 Operate vehiclesDownload draft unit
AHCMOM206 Conduct grader operationsDownload draft unit
AHCMOM207 Conduct front-end loader operationsDownload draft unit
AHCMOM208 Conduct excavator operationsDownload draft unit
AHCMOM209 Conduct dozer operationsDownload draft unit
AHCMOM210 Conduct scraper operationsDownload draft unit
AHCMOM213 Operate and maintain chainsawsDownload draft unit
AHCMOM214 Operate cane haulage vehicleDownload draft unit

Click here to download a zipped folder of all units in this group

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify:

  • Pre-operational checks
  • Attachments
  • Biosecurity Implications
  • Machinery and equipment
  • Resource requirements
  • Load security
AHCMOM301 Coordinate machinery and equipment maintenance and repairDownload draft unit
AHCMOM302 Perform machinery maintenanceDownload draft unit
AHCMOM304 Operate machinery and equipmentDownload draft unit
AHCMOM305 Operate specialised machinery and equipmentDownload draft unit
AHCMOM306 Ground spread fertilizer and soil ameliorantDownload draft unit
AHCMOM307 Operate a cane harvesterDownload draft unit
AHCMOM308 Operate broadacre and row crop harvest machinery and equipmentDownload draft unit
AHCMOM309 Operate broadacre sowing machinery and equipmentDownload draft unit
AHCMOM310 Operate land-forming machinery and equipmentDownload draft unit
AHCMOM311 Operate precision control technologyDownload draft unit
AHCMOM312 Operate row crop planting and seeding machinery and equipmentDownload draft unit
AHCMOM313 Operate mobile irrigation machinery and equipmentDownload draft unit
AHCMOM314 Transport machineryDownload draft unit
AHCMOM315 Operate chemical application machinery and equipmentDownload draft unit
AHCMOM316 Refuel machinery or vehicleDownload draft unit

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify:

  • Machinery and equipment
  • Personal protective equipment
AHCMOM401 Conduct major repair and overhaul of machinery and equipmentDownload draft unit
AHCMOM402 Supervise maintenance of property, machinery and equipmentDownload draft unit

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify:

  • Machinery and equipment
  • Services
AHCMOM501 Manage machinery and equipmentDownload draft unit
AHCMOM502 Implement a machinery and management systemDownload draft unit

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify alternatives to ownership.

AHCMOM601 Analyse machinery optionsDownload draft unit

 

Register your interest in the project

Subscribe to the Skills Impact newsletter to keep informed about project updates. Make sure to select ‘Agriculture, Horticulture, Conservation & Land Management’ as your industry of interest on the subscription form.

 

Validation

Thank you to those that participated in the validation process for the final draft Certificate III in Rural Machinery Operations and units of competency, including the new unit for operating tractors with attachments.

All final drafts will shortly progress through the Finalisation stage of the project, which includes quality assurance of the documents and review and feedback from the State/Territory Training Authorities, before the final drafts will be forwarded to the Agriculture and Production Horticulture Industry Reference Committee (IRC) and the Amenity Horticulture, Landscaping, Conservation & Land Management IRC for consideration and sign off. They will then be submitted to the Australian Industry and Skills Committee (AISC) to consider and approve for publication on training.gov.au.

Validation means checking and confirming that the documents are logical and factually accurate.

The final draft qualification, skill sets and units that were available for industry validation are listed below.

 

New Unit

This new unit was available for industry validation between 10 – 22 April 2018.

This new unit was developed in response to industry feedback received during the consultation stage for the draft Certificate III in Rural Machinery Operations and related units. Feedback from industry was that there was a need for an Australian Qualifications Framework (AQF) level three unit, for operating high powered tractors with attachments.

This new unit does not replace the existing unit AHCMOM202 Operate tractors. The recommendation was to keep this existing unit as it currently applies to learners, starting on less powerful tractors under direct supervision before moving onto more complex vehicles.

 

AHCMOM317 Operate tractors with attachmentsDownload final draft unit

 

Download the draft unit that was available for consultation between 25 January – 20 February 2018. During that time, one item of feedback was recorded from a peak Union body (AWU) about the prevalence of Injuries that can occur when operators don’t adapt practices to the changing external conditions when fitting attachments. For example, wet and slippery conditions compared to dry and clear conditions.

This feedback was considered important and updates were made to the Performance Criteria, Performance Evidence and Knowledge Evidence to address concerns about injuries caused when attachments are not fitted and used safely, including the use of safe work practices at all times and consideration of external conditions.

Performance Criteria Update (changes marked in blue)

2.2 Remove and safely fit attachment according to manufacturer instructions and local conditions for use

Performance Evidence Update (changes marked in blue)

  • implemented safe working practices to minimise risks when fitting and using attachments
  • selected and safely attached, removed, tested and used a range of tractor attachments and implements according to manufacturer specifications, operating procedures and varied local weather conditions

Knowledge Evidence Update (changes marked in blue)

  • features, operational functions and procedures for safe fitting and use of attachments and implements
  • effects of various surface and difficult terrain conditions on tractor operation and use of attachments
  • common injuries, causes and implications of using unsafe practices when operating tractors and fitting attachments

Qualification & Units

The final draft Certificate III in Rural Machinery Operations and units of competency that were made available for industry validation, between 25 January 2018 – 8 February 2018, are listed below. Thank you to those who participated in the validation process. They have been updated to incorporate the use of new technology and safety measures in all farm mobile machinery operations within the agriculture sector.

A summary of the feedback that was received during the consultation period (between 9 November – 10 December 2017) and a description of its consideration and application in these final drafts can be downloaded below.

 Qualification and units – Download Summary of Feedback, Responses and Actions

Comments and feedback on these final drafts is being collated for consideration by the Agriculture and Production Horticulture Industry Reference Committee (IRC) and the Amenity Horticulture, Landscaping, Conservation & Land Management IRC. After final quality assurance of the drafts, and review and feedback from the State/Territory Training Authorities, the final drafts will be forwarded to the IRCs for consideration and sign off. They will then be submitted to the Australian Industry and Skills Committee (AISC) to consider and approve for publication on training.gov.au.

AHC32618 Certificate III in Rural Machinery OperationsDownload final draft qualification

Note: The following changes have been proposed for the packaging rules of this qualification:

Industry feedback identified that AHCBIO305 Apply biosecurity measures should be added to the core unit list for this qualification to reflect contemporary industry practice. It was also identified that a number of AHCMOM units and imported units should be added to the elective unit list to cover a wider range of machinery used in rural operations. In addition, two new units that have been developed (AHCMOM215 Operate commercial lawnmowers and AHCMOM317 Operate tractors with attachments) which will also be included in the elective list for this qualification.

Proposed Packaging Rules

  • Total number of units = 16
  • Core Units = 7
  • Elective Units = 9

Current Packaging Rules

  • Total number of units = 16
  • Core Units = 6
  • Elective Units = 10

The AQF alignment for the qualification has been revised.

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM211 Operate side by side utility vehiclesMinor edits to application, performance criteria 2.7, performance evidence and assessment conditions. Added range of conditions.Download final draft unit
AHCMOM212 Operate quad bikesReviewed and redesigned unit, minor edits to performance criteria 1.1, 1.6, 2.5, 3.3, 3.5, knowledge evidence and assessment conditions. Added range of conditions.Download final draft unit
AHCMOM201 Operate two wheel motorbikesReviewed and redesigned unit, minor edits to performance criteria 3.6, knowledge evidence and assessment conditions. Added range of conditions.Download final draft unit

AHCMOM101 Assist with routine maintenance of machinery and equipmentDownload final draft unit

Click here to download a zipped folder of all units in this group

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM202 Operate tractorsMinor changes to clarify intent of unit and correct typographical error in knowledge evidence.Download final draft unit
AHCMOM203 Operate basic machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM204 Undertake operational maintenance of machineryMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM205 Operate vehiclesMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM206 Conduct grader operationsMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM207 Conduct front-end loader operationsMinor edits to application, performance criteria 1.1, 1.2, 2.1, and 2.8, element 2, performance evidence and assessment conditions. Added range of conditions.Download final draft unit
AHCMOM208 Conduct excavator operationsMinor changes to clarify intent of unit and correct typographical error in performance evidence. Added range of conditions.Download final draft unit
AHCMOM209 Conduct dozer operationsMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM210 Conduct scraper operationsMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM213 Operate and maintain chainsawsReviewed and redesigned unit, minor edits to performance criteria 1.1, 1.3, 1.5, 2.4, 3.3, 3.5, 4.1, 4.4, 4.8, 4.9, 5.2, and 5.4, element 3, performance evidence, knowledge evidence and assessment conditions. Added range of conditions.Download final draft unit
AHCMOM214 Operate cane haulage vehicleMinor changes to clarify intent of unit and correct typographical error in performance evidence. Added range of conditions.Download final draft unit
AHCMOM215 Operate commercial lawnmowersNew unitDownload final draft unit

Click here to download a zipped folder of all units in this group

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM301 Coordinate machinery and equipment maintenance and repairMinor changes to clarify intent of unit and correct typographical error in knowledge evidence. Added range of conditions.Download final draft unit
AHCMOM302 Perform machinery maintenanceMinor edits to performance criteria 3.1 and performance evidence. Added range of conditions.Download final draft unit
AHCMOM304 Operate machinery and equipmentMinor edits to application, performance evidence, knowledge evidence and assessment conditions. Added range of conditions.Download final draft unit
AHCMOM305 Operate specialised machinery and equipmentMinor changes to clarify intent of unit and correct typographical errors in performance evidence and knowledge evidence. Added range of conditions.Download final draft unit
AHCMOM306 Ground spread fertiliser and soil ameliorantMinor changes to clarify intent of unit and correct typographical error in knowledge evidence. Added range of conditions.Download final draft unit
AHCMOM307 Operate a cane harvesterMinor changes to clarify intent of unit and correct typographical error in performance evidence. Added range of conditions.Download final draft unit
AHCMOM308 Operate broadacre and row crop harvest machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM309 Operate broadacre sowing machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM310 Operate land-forming machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM311 Operate precision control technologyMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM312 Operate row crop planting and seeding machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM313 Operate mobile irrigation machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM314 Transport machineryMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM315 Operate chemical application machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM316 Refuel machinery or vehicleMinor changes to clarify intent of unit and correct typographical error in knowledge evidence. Added range of conditions.Download final draft unit

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM401 Conduct major repair and overhaul of machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM402 Supervise maintenance of property, machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM501 Manage machinery and equipmentMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit
AHCMOM502 Implement a machinery and management systemMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit

Please note that the performance criteria has been updated in these units and a new range of conditions section has been added to clarify alternatives to ownership.

Unit Code and TitleProposed changes based on industry feedbackLink to Download
AHCMOM601 Analyse machinery optionsMinor changes to clarify intent of unit. Added range of conditions.Download final draft unit

 

 

Register your interest in the project

Subscribe to the Skills Impact newsletter to keep informed about project updates. Make sure to select ‘Agriculture, Horticulture, Conservation & Land Management’ as your industry of interest on the subscription form.

 

Next stage of the project

Once industry has validated all final drafts they will be submitted to the Agriculture and Production Horticulture Industry Reference Committee (IRC) and the Amenity Horticulture, Landscaping, Conservation & Land Management IRC for consideration and sign off. After final quality assurance of the drafts, they will be submitted to the Australian Industry and Skills Committee (AISC) to consider and approve for publication on training.gov.au.

Finalisation

On the 12 September 2018, the Australian Industry and Skills Committee (AISC) approved the Case for Endorsement for the updated and revised qualification and units of competency, along with a Companion Volume Implementation Guide.

The final qualification and units are now published on training.gov.au, which means they are available for use by registered training organisations (RTOs). They are published within the AHC Agriculture, Horticulture and Conservation and Land Management Training Package version 3 (published on 19/12/2018). Click here to view the training package.

This project reviewed units of competency, skill sets and qualifications relating to the use of new technology and safety measures across a range of mobile farm machinery operations.

What does this mean for training providers?

Registered training organisations (RTOs) may now apply to have the updated qualifications, skill sets and units added to their scope of registration. RTOs who already have the qualifications, skill sets and units that have been updated as part of this endorsement have 12 months to transition to deliver the updated qualifications, skill sets and units, from the date of publication. For more information, visit the Australian Skills Quality Authority (ASQA) website. 

A Companion Volume Implementation Guide has also been produced to help training providers implement the new and revised qualifications, skill sets and units. It can be downloaded from VETNet.com. 

Summary of consultation

Initial consultation took place with a group of Subject Matter Experts (SMEs), to gather information that informed the draft qualification and units. Public consultation and feedback workshops were held around Australia in Bendigo, Perth, Darwin, Brisbane, Adelaide, Launceston and Orange. Broad consultation took place via the website, where the draft documents were made available for download and feedback for a four week period and again, for an additional two weeks, when the drafts were revised for validation. A webinar also took place on two separate occasions with the Queensland Agriculture Industry Sector Panel covering the agriculture and horticulture sectors.

Summary of project outcomes
  • 1 revised qualification – AHC32618 Certificate III in Rural Machinery Operations. 
  • 37 units of competency (included 2 new units, for the operation of commercial lawnmowers and tractors with attachments).
Case for Endorsement

Please see the Case for Endorsement for more information about the work that was undertaken and why:

  Download the AHC Case for Endorsement

Note that qualifications, skill sets and units developed out of the following projects were also approved as part of this Case for Endorsement:

Please find below links to the final qualification and units on training.gov.au

 

AHC31918 Certificate III in Rural Machinery OperationsView qualification on training.gov.au

 

AHCMOM216 Operate side by side utility vehiclesView unit on training.gov.au 
AHCMOM217 Operate quad bikesView unit on training.gov.au
AHCMOM201 Operate two wheel motorbikesView unit on training.gov.au

 

AHCMOM101 Assist with routine maintenance of machinery and equipmentView unit on training.gov.au

 

AHCMOM202 Operate tractorsView unit on training.gov.au
AHCMOM203 Operate basic machinery and equipmentView unit on training.gov.au
AHCMOM204 Undertake operational maintenance of machineryView unit on training.gov.au
AHCMOM205 Operate vehiclesView unit on training.gov.au
AHCMOM206 Conduct grader operationsView unit on training.gov.au
AHCMOM207 Conduct front-end loader operationsView unit on training.gov.au
AHCMOM208 Conduct excavator operationsView unit on training.gov.au
AHCMOM209 Conduct dozer operationsView unit on training.gov.au
AHCMOM210 Conduct scraper operationsView unit on training.gov.au
AHCMOM213 Operate and maintain chainsawsView unit on training.gov.au
AHCMOM214 Operate cane haulage vehicleView unit on training.gov.au
AHCMOM215 Operate commercial lawnmowersView unit on training.gov.au

 

AHCMOM301 Coordinate machinery and equipment maintenance and repairView unit on training.gov.au
AHCMOM302 Perform machinery maintenanceView unit on training.gov.au
AHCMOM304 Operate machinery and equipmentView unit on training.gov.au
AHCMOM305 Operate specialised machinery and equipmentView unit on training.gov.au
AHCMOM306 Ground spread fertiliser and soil ameliorantView unit on training.gov.au
AHCMOM307 Operate a cane harvesterView unit on training.gov.au
AHCMOM308 Operate broadacre and row crop harvest machinery and equipmentView unit on training.gov.au
AHCMOM309 Operate broadacre sowing machinery and equipmentView unit on training.gov.au
AHCMOM310 Operate land-forming machinery and equipmentView unit on training.gov.au
AHCMOM311 Operate precision control technologyView unit on training.gov.au
AHCMOM312 Operate row crop planting and seeding machinery and equipmentView unit on training.gov.au
AHCMOM313 Operate mobile irrigation machinery and equipmentView unit on training.gov.au
AHCMOM314 Transport machineryView unit on training.gov.au
AHCMOM315 Operate chemical application machinery and equipmentView unit on training.gov.au
AHCMOM316 Refuel machinery or vehicleView unit on training.gov.au
AHCMOM317 Operate tractors with attachmentsView unit on training.gov.au

 

AHCMOM401 Conduct major repair and overhaul of machinery and equipmentView unit on training.gov.au
AHCMOM402 Supervise maintenance of property, machinery and equipmentView unit on training.gov.au

 

AHCMOM501 Manage machinery and equipmentView unit on training.gov.au
AHCMOM502 Implement a machinery and management systemView unit on training.gov.au